Primeira vez aqui? Seja bem vindo e cheque o FAQ!
x

Usuário u8oqcoj093

Usuário por: 1 ano (desde Mai 6, 2020)
Tipo: Usuário cadastrado
Nome completo:
Localização:
Site ou Blog: https://sonsanepoxy.vn/nhung-dieu-ban-nen-biet-son-nuoc-goc-dau-la-gi/
Sobre: Circuit boards with lights in epoxy in the table
Circuit board desk in 10 techniques Stage one The Idea.

Placing boards like these in epoxy in a desk .

.

but.

.

.

.

what table? eventually I discovered this desk on the net the trendy metal legs will go properly with the boards Move 2 Preparation.

the wood with the previous table was discolored as well as steel was dirty so with paint stripper I removed aged layers of varnish (I made use of a scrape card for that) and I cleaned the steel the backs from the boards needed to be really flat very first I attempted to get rid of elements which has a soldering iron but the speediest way was with pliers Phase 3 Producing area.

mmm.

.

how would I be Placing the boards in? I imply, in what shape? I selected The easy strip form I Slash that condition to depth Together with the noticed .

.

to about 25 mm I took out a twenty five x 4 grid Together with the router the remaining blocks, I chiseled out significant parts Using the grain with the wood The remainder sideways and right after cleaning it had been ready for.

.

Stage four Placing the boards in.

I did not choose to see any wood in the compact spaces close to the boards so I place With this aluminium tape then it had been merely a puzzle here and there I needed to .

.

.

.

pressure a board down using a screw because the Center name of my workshop .

.

.

.

is 'dust' .

.

I figured I'd to create a tent in advance of pouring epoxy Move 5 Producing a tent.

almost nothing extravagant, just two tent-formed ends linked by Wooden on the sides strips .

.

.

.

coated with garbage luggage some boards have been continue to free for the following step they necessary to be mounted so this was the main pour with epoxy last chance to situation the boards Action seven Putting in the LEDs (which have been now not LEDs :-) I preferred lights to gentle up but with out electricity .

.

no cables or batteries .

.

nah .

.

so I considered fiber optic cable And that i took a traditional LED drilled a hole in the bottom broke from the wires .

.

and caught a fiber cable in then I drilled holes within the boards and stuck the (glued) fibers On this block having a gap .

.

is the focal point to the fiber cables I pulled the fibers as a result of .

.

.

.

glued them in .

.

.

.

and Lower them off funny: you'll be able to see the colours of your LEDs just to be certain .

.

I poured while in the LEDs thus far, so good .

.

on to .

.

Step eight The massive Pour.

witness .

.

the pouring of .

.

7 liters epoxy the epoxy disclosed .

.

the table is bent in the center so I had to pour further at the edges Step 9 Sanding You should not ask me why .

.

.

.

but I recorded most of the sanding so now I'm sure .

.

.

.

it took me a complete of 2.

five hours with 60, one hundred, 180 and 320 grit Phase 10 End the first strategy was .

.

.

.

to sand and polish the epoxy as an alternative I decided to pour an additional layer I'll explain later why I sanded the Wooden a person very last time and gave it some coats of Danish Oil > The End Result Epilogue So? Achievement or Are unsuccessful? effectively, opposite of what you might think soon after observing this video clip the table was a fall short What? Why? Someplace in the method, and i am not just positive where by, the epoxy acquired not blended effectively adequate.

That resulted in sticky delicate spots and very unattractive places wait, allow me to present You could not it be fixed? That is why I made an effort to put A different layer in excess of everything - what you just observed in the 'end'-part of the movie but that did not support in any way there were a great number of comfortable spots at the perimeters, that the sticky epoxy kept crawling up and out so not just ended up there unappealing spots While in the epoxy, the desk remaining forever sticky, made it pretty much as good as worthless Bummer! Yeah, I had been very upset by this, due to the fact ninety five p.c with the epoxy is fine and it is extremely pleasant to consider the lots of particulars with the circuit boards also to Perform While using the lights What now? well, I guess I should consider my decline and see it as a Understanding factor What is going to you need to do with the table? I'm not sure nevertheless.

I will continue to keep it for now and think it over.

definitely getting it appropriate would signify for making an extra groove at the sides, amongst the Wooden as well as the epoxy, by using a router or a noticed and chisel the failed epoxy out that may be loads of get the job done, so .

.

I guess I will slumber on it for some time Although the table might not be a complete good results, just perhaps you figured out a thing from the video clip, Or perhaps you uncovered the video entertaining.

In the event you preferred the video clip (not the table) be sure to like the movie and subscribe into the channel.

See you within our next online video!.

Atividade de u8oqcoj093

Pontuação: 1 ponto (classificado em #254)
Perguntas: 0
Respostas: 0
Comentários: 0
Votou em: 0 perguntas, 0 respostas
Distribuiu: 0 votos positivos, 0 votos negativos
Recebeu: 0 votos positivos, 0 votos negativos

Medalhas

Bronze

Humano x 1
...